Add item to cart to see price
Product Overview:
Part Number: MX202W/C

It's hard to believe that such small, unobtrusive microphones can produce such great sound, but it's true. Available in black or white finishes, and with in line or plate mount preamps, the Microflex Overhead condenser microphones capture Shure quality sound in a compact, adjustable package. Each model features one of the three interchangeable condenser microphone cartridges attached to a flexible, four inch gooseneck with a 30 foot cable. The preamp options available offer easy installation in ceilings or microphone stands, and when combined with the high sensitivity cartridge's wide frequency response, these microphones provide accurate sound reproduction with a minimum of RF interference or electromagnetic hum. The new Microflex Overheads feature interchangeable cardioid, supercardioid and omnidirectional condenser cartridges that fit every model in the Microflex product line for enhanced convenience and consistent sound. MX202W/C: White mini-condenser microphone (cardioid); includes cable, in-line preamplifier, and stand adapter.

Features:

Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum

Balanced, transformerless output for increased immunity to noise over long cable runs

White finish that blends unobtrusively with most surroundings

Specifications:

Microphone Type: Condenser

Polar Pattern: Cardioid (unidirectional)

Frequency Response: 50 to 17,000 Hz

Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of microphone output connector

Output Impedance: 180 ohms actual (EIA rated at 150 ohms)

Sensitivity (at 1,000 Hz, open circuit voltage*): -35.0 dBV/Pa (17.8 mV)

Maximum SPL (1 kHz at 1% THD, 1 k ohm load): 124.2 dB

Equivalent Output Noise (A-weighted): 28.0 dB SPL

Signal to Noise Ratio (referenced at 94 dB SPL): 66.0 dB

Dynamic Range at 1 k ohm load:
96.2 dB
100 dB at 0 gain

Common Mode Rejection: 45.0 dB minimum

Preamplifier Output Clipping Level (1% THD):
-6.0 dBV (0.5 V)
-12 dBV at 0 gain

Power Requirements: 11 to 52 Vdc phantom, 2.0 mA

Environmental Conditions: Operating Temperature Range: -18 to 57 degrees C (0 to 135 degrees F). Relative Humidity: 0 to 95%