Product Overview:
Part Number: 8331-14G

Silver Conductive Epoxy: This two part silver epoxy offers high electrical conductivity and strong conductive bonding. Use in place of traditional soldering on heat sensitive components. Good for repairing defective traces and creating jumpers on boards. Can be used as an effective heat sink adhesive. This Conductive Silver Epoxy comes in two 7g syringes.

Common Questions:

Q. Can I solder to Silver Conductive Epoxy?

A. No, Silver Conductive Epoxy has the temperature contraints of an epoxy and cannot be soldered to. Soldering to this product will cause it to melt.

Q. My 8331 product has a small discoloration. Is this a problem?

A. The discoloration is not a problem and will not affect the adhesive nor the conductive properties

Specifications:

Type: Adhesive Conductive Epoxy

Fill Volume: 14 grams (7g each syringe)

Consistency: Paste

Specific Gravity:
  Part A: 2.47
  Part B: 2.2

Cure Time @ 24° C (75° F): 4 Hours

Cure Time @ 65° C (150° F): 10 Minutes

Operating Temperature: -22°F to 194°F (-30°C to 90°C)

Working Time @ 22° C: 10 Minutes

Tensile Strength: 911 psi

Elongation: 0.3%

Comprehensive Strength: 1,100 psi

Flexural Strength: 2,500 psi

Shear Strength: 234 psi

Cantilever Beam (IZOD) Impact: 0.39 ft lb ft / in

Thermal Expansion: 79.3 mm/mm°C

MSDS: Part A,  Part B

Shipping Class: Non-Regulated

Manufacturer: MG Chemicals